Motor,PSC,1/4 HP,1075 RPM,115V,42Y,OAO

Leather Gloves, Hand Protection Style Glove, Additional Hazard Protection None, Leather Glove Style Drivers, Cut-Resistance Coverage Palm Side, ANSI/ISEA Impact Level Not Tested, ANSI/ISEA Cut Level A5, Finger Coverage Full Finger, Stitching Material Kevlar(R), Insulated Yes, Sold As Pair, Leather Coverage Style Leather Palm, Standards ANSI/ISEA 105, EN 388, Glove Length 11 13/16 in, Glove Hand Style Left and Right, Thumb Style Wing, Glove Insulation Material HeatKeep(R), Cuff Style Knit.

Knit Gloves, Hem Style Finished, Glove Style Knit, Knit Material Nylon/Spandex, ANSI/ISEA Abrasion Level 3, Hand Protection Style Glove, Glove Insulation Material Foam, EN 388 Rating 3121X, Standards ANSI, EN 388: 2016, Insulated No, Palm Type Coated, Glove Coating Cover Palm and Fingers, Glove Hand Style Left and Right, Double-Dipped No, Coating Type Dipped, Glove Performance High Dexterity, 1 Pair.

1/2" FNPT Stainless Steel Ball Valve Inline Range 0 Degrees to 400 Degrees F, Ball Material 316 Stainless Steel, Seat Material RPTFE, Stem Type Self-Adjusting, Handle Type Locking Lever, Handle Material 304 Stainless Steel, Stem Material 316 Stainless Steel, Body Seal Material PTFE Pressure 1,000 psi CWP, Max..

. Amps @ 250VAC 10 A, Max.

Staple Gun,15 in L Hose Size 1/4 in, Exhaust Location Rear, Tool Brand Paslode, Firing Mode Bump, Depth Control Yes, Fastener Type Flooring, Roofing, For Staple Leg Length 3/4 in to 2 in, For Staple Type Crowned, For Staple Width 15/16 in, For Staple Gauge 16 ga, Staple Capacity 150, Duty Rating Industrial Duty, Overall Height 11 3/4 in, Overall Length 15 in Air Pressure 120 psi, Min.

375 in, Gauge Not Applicable, Product Type Framing Nails, Material Steel, Finish Plain, Penny Size 8D, Head Type Offset Round, Head Diameter 7/64 in, Shank Type Ring, Point Type Diamond, Collation Type Tape, Collation Configuration Strip, Collation Angle 30 Degrees , Collation Quantity 48, For Use With 501000, 900420, 902205, 902600, Pack Size Small Pack, Manufacturer Location Globally Sourced, Package Quantity 2000.Framing Nails, Overall Length 2 3/8 in, Shank Diameter 2.

Trigger Spray Bottle, Dispensing Type Stream, 32 oz, Clear, Sprayer Color Red, Bottle Material Polyethylene, Polypropylene, Sprayer Material Polyethylene, Polypropylene, Dip Tube Length 9 7/8 in, Acid Resistant Seal No, Imprinting No Imprinting, Graduation Markings Yes, Graduation Increments 1 fl oz, Overall Height 12 1/2 in, Closure Size 28/400, Features Adjustable Nozzle, Closure Diamenter 28 mm, Closure Thread Style 400.

Motor,PSC,1/4 HP,1075 RPM,115V,42Y,OAO 40 Degrees C, Lead Length 13 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Ring, Motor Mounting Position Horizontal, Number of Shafts 1. Ambient Temp.08 A, 42Y Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz Hz, Motor Service Factor 1, Ins.

Trigger Spray Bottle, Dispensing Type Stream, 32 oz, Clear, Sprayer Color Red, Bottle Material Polyethylene, Polypropylene, Sprayer Material Polyethylene, Polypropylene, Dip Tube Length 9 7/8 in, Acid Resistant Seal No, Imprinting No Imprinting, Graduation Markings Yes, Graduation Increments 1 fl oz, Overall Height 12 1/2 in, Closure Size 28/400, Features Adjustable Nozzle, Closure Diamenter 28 mm, Closure Thread Style 400.

of Speeds 3, Voltage 115V AC, Full Load Amps 4. Ambient Temp. Motor,PSC,1/4 HP,1075 RPM,115V,42Y,OAO 40 Degrees C, Lead Length 13 in, Motor Enclosure Design Open Air-Over, Motor Mounting Type Ring, Motor Mounting Position Horizontal, Number of Shafts 1.Direct Drive Blower Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/4 HP, Nameplate RPM 1,075, No.