3/4 X 3/8 316/316L Stainless Steel Swage Nipple Sch 40

Intermediate Sub Assembly, Product Type Intermediate Sub Assembly.

Contactor,Std,Non-Reversing,12 A,24V DC.

0 Percent, Gauge Case Material 304 Stainless Steel, Process Connection Type NPT, Process Connection Gender Male, Lens Material Polycarbonate, Process Connection Size 1/4 in, Field Fillable No, Process Connection Location Bottom, Case Color Gray, IP/NEMA Rating IP66, NEMA 4X, Primary Pressure Range 0 to 1,000, Dry Dampening Feature None, Vibration Resistance Liquid-Filled, Dial Color Glow-in-the-Dark White.Industrial Pressure Gauge, Nominal Dial Size 4 in, Accuracy +/-1.

Breather Vent,3/8 In., Air Inlet Size 3/8 in, Air Inlet Type NPT, Maximum Operating Pressure 150 psi, Minimum Operating Temperature 35 Degrees F, Maximum Operating Temperature 300 Degrees F, Filter Rating 40 micron, Air Outlet Size 3/8 in, Air Outlet Type NPT, Minimum Flow Rate 0 scfm, Outside Diameter 11/16 in.

Hammer Drive Anchor, Anchor Diameter 1/4 in, Overall Length 4 in, Anchor Material Steel, Finish Zinc Plated, Head Type Flat, Head Height Not Applicable, Head Diameter 0.5 in, Drill Bit Size 1/4 in, Minimum Installation Depth 1 1/8 in, Ultimate Shear Strength (4,000 psi Concrete) 2,230 lb, Ultimate Tension Strength (4,000 psi Concrete) 2,010 lb, Drive Pin Anchor Type Steel Drive Anchors, Compatible Material Masonry, Stone, Material Grade/Class Grade 5, Removable Removable.

Swage Nipple, Stainless Steel, 316/316L, For Pipe Schedule 40, 1 1/2 in, Plain, 1 7/8 in, 1 1/4 in, Plain, 1 5/8 in, 3000 psi Maximum Operating Pressure.

Swage Nipple, Stainless Steel, 316/316L, For Pipe Schedule 40, 3/4 in, Threaded, 1 in, 18, 3/8 in, Threaded, 5/8 in, 18, 3000 psi Maximum Operating Pressure.

25 in.38 in, Hole Spacing 0.56 in, Tongue Width 1.

Swage Nipple, Stainless Steel, 316/316L, For Pipe Schedule 40, 3/4 in, Threaded, 1 in, 18, 3/8 in, Threaded, 5/8 in, 18, 3000 psi Maximum Operating Pressure.

64 in, Tongue Thickness 0.Mechanical Connector, For Conductor Material Aluminum, Copper, For Stranded Copper Wire Size - Minimum 6 AWG, For Stranded Copper Wire Size - Maximum 250 kcmil, For Stud Size 3/8 in, Head Style Socket, Number of Holes 2, Hole Diameter 0.