Tapered Roller Bearing Assy.,14.25 Mm

045 in, Nominal Width 3/32 in, Nominal Inside Dia. 13/16 in, Cross Section Shape Rectangular, Durometer 55 Shore D, Durometer (Hardness) Rating Very Hard, Color Black, Temp. 114, Thickness 0. Backup Ring,Hytrel,114,PK50 Range -65 Degrees to 275 Degrees F, Package Quantity 50.

875 in, System of Measurement Inch, Head Material Iron, Head Shape Wing, Package Quantity 25.875 in, Tensile Strength 50,000 psi, Head Type Wing, Maximum Head Height 0.

Mountable Shaft Collar, System of Measurement Metric, Bore Type Round, Bore Diameter 15 mm, Bore Thread Size Not Applicable, Collar Outside Diameter 34 mm, Inside Height to Flat Not Applicable, Clearance Diameter 39.3 mm, Collar Width 13 mm, Collar Material Carbon Steel, Keyway Width Not Applicable, Collar Material Grade 1215, Keyway Depth Not Applicable, Collar Construction 1-Piece, Screw Material Alloy Steel, Screw Material Finish Black Oxide, Resistance Properties Corrosion Resistant.

14, Water Absorption 0.

000 OAL Oal.

1 NM (Mz), Carriage Length 60 mm, Carriage Type Profile Rail, Carriage Width 60 mm, Drive End Option PBC Linear Integrated Motor Screw, Drive Input Speed 3,000 RPM, Lead Diameter 2 mm, Lubricant Oil Based Lithium Soap Grease.Compact Linear Actuator, Acceleration 50 m/sq sec, Rail System Type Profile Rail, Number of Carriages Included 1, Cover Type Tall, Bearing Load Capacity 2,500 N, Bearing Type Ball, Carriage Bearing Moment Load Capacity 20.2 NM (Mx);13.

Tapered Roller Bearing Assembly, Bearing Industry Number 30302, Bore Diameter 15 mm, Bore Type Cylindrical, Cage Material Pressed Steel, Cone Width 13 mm, Cup Width 11 mm, Flange Diameter Not Applicable, Flange Type Non-Flanged, Lubricant Material Not Applicable, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outside Diameter 42 mm, Overall Width 14.25 mm, Ring Material Carbon Steel, Roller Material Carbon Steel, System of Measurement Metric.

Rectangle Stock, UHMW Polyethylene, Antistatic, Plastic Length 12 in, Plastic Width 4 in, Plastic Thickness 1 in, Black, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.036 lb/cu in, Corrosion and Chemical Resistance Good.

25 mm, Ring Material Carbon Steel, Roller Material Carbon Steel, System of Measurement Metric.Tapered Roller Bearing Assembly, Bearing Industry Number 30302, Bore Diameter 15 mm, Bore Type Cylindrical, Cage Material Pressed Steel, Cone Width 13 mm, Cup Width 11 mm, Flange Diameter Not Applicable, Flange Type Non-Flanged, Lubricant Material Not Applicable, Maximum Temperature 250 Degrees F, Minimum Temperature -40 Degrees F, Number of Rows One, Outside Diameter 42 mm, Overall Width 14.

0 ft-lb/in, Friction Coefficient 0.01 Percent, Plastic Density 0.15, Water Absorption 0.Rectangle Stock, UHMW Polyethylene, Antistatic, Plastic Length 12 in, Plastic Width 4 in, Plastic Thickness 1 in, Black, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.