Tee Barb,1/4 X 1/4 X 1/8,PK10

Class X Go Pin Gauge, Material Steel, Finish Uncoated, Diameter 0.8850 in, Dimension Type Inch, Gauge Type Go (Plus), Included Certification Certificate of Accuracy with NIST Traceability, Surface Finish 4 Microinch or Better, Tolerance 0.0001 in, Diameter Range 0.7601 in to 1.

. O-Ring,Buna N,33mm OD,PK50 Range -40 Degrees to 250 Degrees F, FDA Approved No, Package Quantity 50 27 mm, Actual Width 3 mm, Color Black, Durometer 70 Shore A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia.

097 in, Dash Number 909, Color Black, Durometer 90 Shore A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia.O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material Viton, Durometer (Hardness) Rating Very Hard, Actual Inside Dia. 0.

1, Package Quantity 25.1, ASME B18.

8.025 in.368 in, Wall Thickness 0.2, Shank Length Tolerance +/-0.

361 in, Pack Size Small Pack, Thread Style Fully Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.

Tee Barb,1/4 x 1/4 x 1/8", Package Quantity 10.

Tangless Free-Running Insert Bulk, 3/8-1.

Tee Barb,1/4 x 1/4 x 1/8", Package Quantity 10.

Tangless Free-Running Insert Bulk, 3/8-1.