1020T HUB X 1-1/8

The 5-micron high efficiency, high performing filter removes dirt, silt and sediment. Connection, 10.0 GPM Siliphos media within the filter chamber prevents scale and stops corrosion by forming a thin protective layer on the element, lining and other surfaces within the water heater.Keeps water heaters clean, efficient and easy to maintain just 1 mm of scale on a heating coil can increase energy costs by 15%5-micron filter with food-grade polyphosphateReduces sediment and inhibits scaleDesigned for all gas and electric water heatersEasy to install includes installation bracketDouble O-ring design for superior leak proofingFilter housing features thicker walls for increased durabilityDesigned for larger water heaters - 10 GPM peak flow rate The Water Heater Shield is installed on the feed water line just prior to the water heater tankless or traditional.

The WorkBrite Pro will also work with 3AA batteries with slightly reduced performance..

x 6in. 3/8in. Chrome Nipple, 3/8in.

.

Our Wood Tambour Panels are easy to install and paint or stain to match your designs. Since our Tambour is real wood, the material must be stretched prior to painting, staining, or coating.. 3/4" Thin Bevel Slat Tambour - Walnut (12"W x 96"L) The material must be acclimated for a minimum of 48 hours prior to finishing.

50mm x 110mm x 27mm, single row deep groove ball bearing, two contact seals, C3 Fit, Electric Motor Quality.

SKF 34000 FKM, pressed-on shaft, grease seal, lip contacting bore.

DODGE 1030TX1-1/8 1020T HUB X 1-1/8.

SKF 34000 FKM, pressed-on shaft, grease seal, lip contacting bore.

DODGE 1030TX1-1/8 1020T HUB X 1-1/8.