Condenser Fan Motor,1140 Rpm,1 HP

SS 2MTDrill and Reamer Driver 13.80 mm.

HD TAP DRIVER 2 HAND TAP 4MT.

.

Open Grid Shelf, Color Green, Epoxy Coated Finish, Material Polypropylene, Steel, Mounting Hardware Required Yes, Mounting Location Bottom, Middle; Top, Number of Pieces 4, Number of Shelves 4, Overall Depth 24 in, Overall Width 54 in, Shelf Adjustment Type Split Sleeve, Shelf Depth 24 in, Shelf Width 54 in, Load Capacity 600 lb, Lip Type Stationary, Lip Height 3/16 in, Includes Mounting Hardware Yes, Includes (16) Pairs of Split Sleeves, Yes NSF Certified, Dry, Wet, ISO 9001-9002 Standards.

Tune Up Kit, Series Not Applicable, Product Type Tune Up Kit, Compatible with Manufacturer Part Number 3940A1Ti, 3940A2Ti, 3940B1Ti, 3940B2Ti, 3940P2Ti, Compatible with Series Not Applicable, Compatible with Brand Ingersoll Rand, Includes Air Port Gasket, Air Port Gasket Retainer, Air Strainer Screen, Ball, Bearings, Exhaust Silencer, Gasket, Hammer Case Gasket, Handle Gasket, O-Ring, Plunger, Plunger Retaining Pins, Seal, Vane Pack.

05 A, Frequency 60 Hz, Electrical Connection Wire Leads, Motor Type Shaded Pole, Motor Insulation Class B, Maximum Fan Speed 3,000 RPM, Maximum Motor Speed 3,000 RPM, Maximum Inlet Air Temperature 400 Degrees F, Maximum Static Pressure 1 1/2 in wc.OEM Blower, Application Furnaces, Inlet Diameter 4 3/4 in, Outlet Diameter Not Applicable, Compatible with Brand York, Replacement For Manufacturer Model Number 026-32067-700, 7021-7481, 7021-8317, Nameplate Voltage 115V AC, Phase 1, Current 1.

3/2. Condenser Fan Motor,1140 rpm,1 HP 60 Degrees C, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Air-Over, Motor Mounting Type Stud, Motor Frame Material Steel.

Worm Gear Hose Clamp, Band Material Stainless Steel, Band Material Grade 201, Band Thickness 0.022 in, Band Type Lined, Band Width 1/2 in, Clamp Maximum Inside Diameter 4 in, Clamp Minimum Inside Diameter 3 1/16 in, Fastener Housing Material 201 Stainless Steel, For Maximum Outside Diameter 4 in, Grade General Purpose, Maximum Operating Temperature 500 Degrees F, SAE Number 56, Screw Material Steel, Screw Material Finish Zinc-Plated, Clamp Type Worm Gear Clamp, Drive Type Slotted Hex.

Ambient Temp.

022 in, Band Type Lined, Band Width 1/2 in, Clamp Maximum Inside Diameter 4 in, Clamp Minimum Inside Diameter 3 1/16 in, Fastener Housing Material 201 Stainless Steel, For Maximum Outside Diameter 4 in, Grade General Purpose, Maximum Operating Temperature 500 Degrees F, SAE Number 56, Screw Material Steel, Screw Material Finish Zinc-Plated, Clamp Type Worm Gear Clamp, Drive Type Slotted Hex.Worm Gear Hose Clamp, Band Material Stainless Steel, Band Material Grade 201, Band Thickness 0.