Hexagon Socket- 3/8 Inch Fully Insulated- Width Across Flats: 15mm

Straight major cutting edges and a special flute profile ensure a good chip evacuation.. Pro Steel Solid Carbide Drill, 3/16 inch Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank Standard: DIN 6537 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 36. The robust cutter geometry ensures high-performance drilling with good process reliability.

- HSS-E-PM tool material for maximum wear resistance.

5 x DC. Cutting chisel edge with high centring accuracy due to strong core and special point geometry.

Note: Size 16 - 20: Drills with shank dia 16 mm.4 mm. HSS Jobber Drill, Uncoated, 11 mm Through-coolant: no Standard: DIN 338 Tolerance nominal dia : h8 Point angle: 118 Deg Shank: Plain shank Number of cutting edges Z: 2 recommended maximum drilling depth L2: 77.

8 mm Dia, 140 Deg Point Angle, AlTiN-Si Coated, Plain Shank Through-coolant: no Standard: DIN 6537 Tolerance nominal dia : m7 Number of cutting edges Z: 2 Tolerance nominal dia : m7 recommended maximum drilling depth L2: 53. Solid Carbide Drill, 11.

2 mm Tapping hole dia : 6. GARANT Master Tap general-purpose tap- designed for use on a wide spectrum of materials with high process reliability.94 mm Overall length L: 90 mm Shank dia Ds: 8 mm Shank square : 6. - HSS-E-PM tool material for maximum wear resistance.

Hexagon socket- 3/8 inch fully insulated- Width across flats: 15mm Square drive: 3/8 in drive output end: 26 mm Length: 45 mm Note: For working at voltages up to 1000 Volts. Standard: DIN EN IEC 60900 / VDE 0682-201.637681 - 637689 may be used in combination.

Note: Further sizes and types on request. Impact Socket, 3/4 inch Drive, 6 pt, 1-3/4 inch Square drive: 3/4 in dia drive output end: 44 mm Length: 62 mm For safety reasons must always be secured using a suitable locking pin and O-ring.

With plastic insulation up to 1000 V to DIN EN IEC 60900 / VDE 0682-201.

. Impact Socket, 3/4 inch Drive, 6 pt, 1-3/4 inch Square drive: 3/4 in dia drive output end: 44 mm Length: 62 mm For safety reasons must always be secured using a suitable locking pin and O-ring.