Allpoints 1111272 Pedal, Cold For T&S Brass & Bronze Works

front.

HEAVY-DUTY CAST ALUMINUM HOUSING IS 40% LIGHTER THAN CAST IRON AND EASIER TO MANEUVER. I-BEAM HANDLE AND WIDE DESIGN FOR BETTER WEIGHT DISTRIBUTION AND MANEUVERABILITY. IRWIN® VISE-GRIP® 18" CAST ALUMINUM PIPE WRENCH THIS DURABLE, LIGHTWEIGHT 18" WRENCH HAS A 2-1/2" PIPE CAPACITY.EASY-SPIN ADJUSTING NUT IS HEAT TREATED FOR ADDED DURABILITY.

burner guard 15" x 7" apw gcrb-24h, gcrb-36h, gcrb-48h.

Allpoints 8007657 Puller Disk For Southbend Range fits blower wheels used on southbend models bgs/12sc, bgs/22sc, eb-10cch, eb-10pc, eb-10rt, eb-10sc, eb-20cch, eb-20pc, eb-20rt, eb-20sc, eb/10cch, eb/10pc, eb/10rt, eb/20cch, eb/20pc, eb/20rt, eb/20sc, eh-10cch, eh-10pc, eh-10rt, eh-10sc, eh-20cch, eh-20pc, eh-20rt, eh-20sc, es-10cch, es-10pc, es-10rt, es-10sc, es-20cch, es-20pc, es-20rt, es-20sc, es/10cch, es/10pc, es/10rt, es/10sc, es/20cch, es/20pc, es/20rt, es/20sc, gb-12cch, gb-12pc, gb-12rt, gb-12sc, gb-15cch, gb-15pc, gb-15rt, gb-15sc, gb-22cch, gb-22pc, gb-22rt, gb-22sc, gb-25cch, gb-25pc, gb-25rt, gb-25sc, gs-12cch, gs-12pc, gs-12rt, gs-12sc, gs-15cch, gs-15pc, gs-15rt, gs-15sc, gs-22cch, gs-22pc, gs-22rt, gs-22sc, gs-25cch, gs-25pc, gs-25rt.

Allpoints 38-1264 High Temperature Wire; #12 Gauge; Stranded SRGN; White; 50' Roll silicone rubber & glass braid insulation, nickel coated copper. #12 gauge, stranded srgn, white, max temp rating 482f, 600v.

material: stainless steel length: 16" tube | 406 mm tube outer diameter: 3 1/8" | 79 mm note: for 3-4 1/2 cups.

14 x 28, National Fine Thread, Fractional Tap, Carbon Steel, Ideal For Routine Maintenance, Repair Work For Rethreading Where High Accuracy Tolerance Thread Is Not Critical, Straight Flutes Are Ground To Provide Rapid Chip Removal For Efficient Threading, Designed For Hand Threading Work In A Variety Of Materials Taps Produce A Class 2B Thread, Use Drill Bit 3 Or 1364.

material: brass length: 3" | 76 mm width: 1 5/16" | 33 mm plating: chrome-plated thickness: 1/4" | 7 mm type: cold.

14 x 28, National Fine Thread, Fractional Tap, Carbon Steel, Ideal For Routine Maintenance, Repair Work For Rethreading Where High Accuracy Tolerance Thread Is Not Critical, Straight Flutes Are Ground To Provide Rapid Chip Removal For Efficient Threading, Designed For Hand Threading Work In A Variety Of Materials Taps Produce A Class 2B Thread, Use Drill Bit 3 Or 1364.

material: brass length: 3" | 76 mm width: 1 5/16" | 33 mm plating: chrome-plated thickness: 1/4" | 7 mm type: cold.