O-Ring,Dash 215,PTFE,0.13 In.,PK10

Wire Cage, Indoor, Outdoor, Color Red, Material 9 Gauge Steel With Polyester Coating, Mounting Wall, Width 6 1/8 in, Depth 3 3/8 in, Height 7 3/8 in, For Use With Strobe, Horn, Speaker, Appliance, Standards UL and cUL, Includes Mounting Hardware.

, Gray., Height 1-1/4 In.N/O Contact, Length 1-1/2 In., Width 21/32 In.

7 lb, For Duct Height 14 in, Flange Inner Diameter 14 1/8 in, For Duct Width 14 in, Flange Outer Diameter 17 1/8 in, Inside Diameter 1/2 in, Number of Holes on Flange 8, Overall Width 14 in, Bolt Circle Diameter 16 in, Minimum Pressure Rating 2 in wc, Shape Straight.Angle Flange Adapter, For Nominal Duct Diameter 14 in, Inlet Diameter 14 in, Material Stainless Steel, Product Type Angle Flange Adapter, Material Thickness 20 ga, Overall Length 5 in, Maximum Pressure Rating 42 in wc, Weight 7.

File Holder, File Size Letter, Number of Compartments (6) Horizontal, Black, Baked Enamel Finish, Plastic, Length 15 15/64 in, Width 9 in, Height 2 3/4 in, Package Quantity 6.

Spray Paint, Opacity 80 Percent, Maximum Dry Film Thickness 2 mil, Coating Application General Purpose Spray Paint, Color Family Yellow, Compatible Surface Material Masonry, Metal, Plastic, Wood, Sheen Gloss, Finish Texture Smooth, Resin Type Modified Alkyd, Color OSHA Safety Yellow, Container Size 12 oz, Coverage Area 15 sq ft, Base Type Solvent, Dry Time 1 hr, Use Location Exterior, Interior, Sub Brand Industrial Choice, Container Type Aerosol Can, Dry Time Tack Free 10 min.

Coal Tar Epoxy Coating Base, Base Type Solvent, Resin Type Polyamide Converted Epoxy Blended with Refined Coal Tar, Color Black, Finish Matte, Size 5 gal, VOC Content Less Than 250 g/L, Coverage 100 to 130 sq ft/gal, Exposure Conditions Marine Environments, Severe Industrial, Dry Time 3 to 36 hr, Cure Time 18 to 36 hr, Application Temperature 50 Degrees to 100 Degrees F, For Use With 3XH20, Epoxy Activator, Activator Properties Low VOC Activator, System Series C9578.

0. 0.

1..

0.064 in, Dash Number 902, Color Black, Durometer 90 Shore A, Meets/Exceeds ASTM D2000, SAE J200, Nominal Outside Dia.

O-Ring, No Metal Detectable, No X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material PTFE, Durometer (Hardness) Rating Very Hard, Nominal Inside Dia.,PK10 Range -100 Degrees to 500 Degrees F, FDA Approved Yes, Package Quantity 10 1..046 in, Actual Width 0.