Specialty Gas Regulator, Single Stage, CGA-660, 0 To 25 Psi, Use With: Corrosive

Shelf, Light Gray, Steel, Zinc Plated Decking Finish, 18 ga, Single Straight, Zinc Plated, Frame Material Steel, Overall Height 1 1/4 in, Overall Width 36 in, Overall Depth 18 in, Load Capacity 950 lb, Includes (2) Shelf Reinforcements, (2) Shelf Supports, Shelf.

GFCI Receptacle, Connection Orientation Straight, Cover Type No Cover, Current Rating 20 A, GFCI Yes, Grounding Grounded, Housing Color Ivory, Housing Material Nylon, Mount Type Flush, NEMA Enclosure Rating 1, NEMA Receptacle Configuration 5-20R, Number of Gangs 1, Number of Poles 2, Number of Wires 3, Phase Single, Polarized Yes, Receptacle Type Decorator Duplex, Resistance Properties Tamper Resistant, Weather Resistant, Standards NEC, Voltage Rating 125V AC, Wiring Method Back, Side, AFCI No.

20.00mm.

5700 in, Package Quantity 3.5600 in, Overall Width 1.Lathe Jaw, Soft, For Use With 8 in Quick Change Chucks, Overall Length 3.

L Cut,Square 1/8 in.Carbide End Milll,1/4 in.

Motor Pin, Series Not Applicable, Compatible with Grainger Part Number 2YPR7, Product Type Not Applicable, Compatible with Manufacturer Part Number Not Applicable, Compatible with Series Not Applicable, Compatible with Brand Speedaire, Includes Not Applicable, Standards Not Applicable.

030 In.High Purity Gas Regulator, Mounting Type Cylinder, Number of Stages Single Stage, Compatible Gas Type Chlorine, Nitric Oxide, Nitrogen Dioxide, Sulfur Dioxide, Control Type Knob, Maximum Inlet Pressure 3,500 psig, Inlet Connection Size 1.5 Percent.

Taper-Lock Bushing, Bushing Type Taper Lock, Bore Bushing Series 1108, Bore Diameter 9/16 in, Length 1.5 in, System of Measurement Standard, Includes (2) Set Screws, Material Steel.

-14, Inlet Connection Gender Male, Inlet Connection Type NGO, Inlet Thread Direction Right Hand, Outlet Pressure (Maximum) 25 psig, Outlet Connection Size 1/8 in, Outlet Connection Type Tube Fitting, Gas Purity Rating 99.

Taper-Lock Bushing, Bushing Type Taper Lock, Bore Bushing Series 1108, Bore Diameter 9/16 in, Length 1.5 in, System of Measurement Standard, Includes (2) Set Screws, Material Steel.