reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Motors,HVAC Motors,3.3 Inch Diameter Motors
FASCO

HVAC Motor,1/80 HP,1500 Rpm,115V,3.3

About The 6 A, 3. Class B, Motor Shaft Rotation CWSE, Max. 40 Degrees C, Lead Length 12 in, Motor Enclosure Design Totally Enclosed Air-Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Number of Shafts 1

40 Degrees C, Lead Length 12 in, Motor Enclosure Design Totally Enclosed Air-Over, Motor Mounting Type Stud, Motor Mounting Position All Angle, Number of Shafts 1 of Speeds 1, Voltage 115V AC, Full Load Amps 0.6 A, 3.3 Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz Hz, Motor Service Factor 1, Ins. Direct Drive Blower Motor, Single Phase, Motor Design Shaded Pole, 1/80 HP, Nameplate RPM 1,500, No. Ambient Temp. Class B, Motor Shaft Rotation CWSE, Max.

Motors,HVAC Motors,3.3 Inch Diameter Motors

HVAC Motor,1/80 HP,1500 Rpm,115V,3.3

Collet Chuck, Taper Size BT40, Min.
Collet Chuck, Taper Size CV40, Min.
More from FASCO :- Ambient Temp.
Search

Motors,HVAC Motors,3.3 Inch Diameter Motors

Specifications of HVAC Motor,1/80 HP,1500 Rpm,115V,3.3

Category
Instockinstock

Last Updated

HVAC Motor,1/80 HP,1500 Rpm,115V,3.3
More Varieties

Rating :- 8.19 /10
Votes :- 31
This ball end hex key set comes in a plastic holder that helps to keep the tools neat and tidy.

This ball end hex key set comes in a plastic holder that helps to keep the tools neat and tidy.

EKLIND's 17222 22 Piece Metric/SAE L-Shape Hex Key Set is a great addition to your toolbox. 22 Piece Metric/SAE L-Shape Hex Key Set, 17222 Each long arm hex key is made of alloy steel and comes complete with a black oxide finish. These hex keys can be used across an extensive range of applications and product categories. It contains a comprehensive range of hex keys for tackling various fasteners.

  • Hand Tools,Wrenches,Hex Keys & Hex Key Sets
  • EKLIND
    • Web Sling, Sling Type Universal Link - Type U, Vertical Hitch Capacity 6,400 lb, Sling Length 5 ft, Sling Width 4 in, Number of Plies 1, Sling Material Polyester, Choker Hitch Capacity 5,000 lb, Basket Hitch Capacity 12,800 lb, Wear Resistant Cover None, Color Yellow, Temp.

    Web Sling, Sling Type Universal Link - Type U, Vertical Hitch Capacity 6,400 lb, Sling Length 5 ft, Sling Width 4 in, Number of Plies 1, Sling Material Polyester, Choker Hitch Capacity 5,000 lb, Basket Hitch Capacity 12,800 lb, Wear Resistant Cover None, Color Yellow, Temp.

    Web Sling, Universal Link, 5 ft L, 4 in W, Polyester, Yellow Range -60 Degrees to 200 Degrees F, Yarn Coating Latex, Resists Grease and Most Acids, Standards ASME B30.184, WSTDA, Includes Web Sling Safety Bulletin Rev 3 11, Sling Hardware Material Steel.

  • Lifting,Pulling & Positioning,Slings,Web Slings
  • LIFT-ALL
    • Web Sling, Sling Type Universal Link - Type U, Vertical Hitch Capacity 6,600 lb, Sling Length 18 ft, Sling Width 3 in, Number of Plies 2, Sling Material Nylon, Choker Hitch Capacity 5,280 lb, Basket Hitch Capacity 13,200 lb, Wear Resistant Cover None, Color Yellow, Temp.
  • Lifting,Pulling & Positioning,Slings,Web Slings
  • LIFT-ALL
    • Spiral Wound Metal Gasket,8 In,316SS

    Spiral Wound Metal Gasket,8 In,316SS

    Spiral Wound Flange Gasket, For Flange ANSI Class 150, For Pipe Size 8 in, Inside Diameter 8 1/2 in, Outside Diameter 11 in, Thickness 3/16 in, Rim Stripe Color Gray, Outside Rim Color Green, Filler Material Graphite, Outer Ring Material Carbon Steel, Minimum Operating Temperature -400 Degrees F, Maximum Operating Temperature 842 Degrees F, Spiral Winding Material Stainless Steel, Spiral Winding Stainless Steel Grade 316L, Inner Ring Material Stainless Steel.

  • Sealing & Gasketing,Flange & Ring Gaskets
  • FLEXITALLIC
    • Clamp,Erlenmeyer Flask 25mL

    Clamp,Erlenmeyer Flask 25mL

    Clamp, Material PTFE, Stainless Steel.

  • Lab Equipment,Lab Mixing & Blending,Lab Mixing Accessories
  • HEIDOLPH
    • Taper Shank Tool Holder, Taper Size NMTB50, Inside Taper Size #3, Projection 2.3800 in, Coolant Fed Coolant Through, Nose Dia.
  • Workholding & Machine Tool Accessories,Milling & Drilling Toolholders,End Mill Holders
  • LYNDEX-NIKKEN
    • Collet Chuck, Taper Size CV40, Min.

    Collet Chuck, Taper Size CV40, Min.

    00 mm, SK10.0690 in, Max.393 in, Projection 90.

  • Machining,Collets,Chucks & Accessories,Collet Accessories
  • LYNDEX-NIKKEN
    • Class B, Motor Shaft Rotation CWSE, Max.
  • Motors,HVAC Motors,3.3 Inch Diameter Motors
  • FASCO
    • Collet Chuck, Taper Size CV40, Min.

    Collet Chuck, Taper Size CV40, Min.

    0690 in, Max.00 mm, SK10. Collet Capacity 0.

  • Machining,Collets,Chucks & Accessories,Collet Accessories
  • LYNDEX-NIKKEN
    • Class B, Motor Shaft Rotation CWSE, Max.

    Class B, Motor Shaft Rotation CWSE, Max.

    3 Frame, Usable @ 208V No, Usable @ 200V No, Motor Thermal Protection Auto, 60 Hz Hz, Motor Service Factor 1, Ins.

  • Motors,HVAC Motors,3.3 Inch Diameter Motors
  • FASCO