Pressure Gauge, 2.5 304SS Case, Copper Alloy Internals, 600 Psi/kPa, 7/16-20 Male Back Conn, Glycerin Filled, Panel Mount Clamp

M3000 4-BOLT FLANGE.

Our Commstones come in 6 grits for commutator or brass/copper slip rings: EC EX tra Coarse-36 Grit, C Coarse-46 Grit, M Medium-90 Grit, F Fine-120 Grit, P Polishing-220 Grit, EP EX tra Polish-320 GritWe also have 3 grits for cast iron and steel slip rings: SRC Coarse-36S Grit, SRM Medium-60S Grit, SRF Finish-90S GritCommutator stones are used for grinding commutators and slip rings into concentricity for maintenance and repair.. 6 in X 10 in X 3 in, Commstone, Grade F With Double Saw Handle The dual handle design gives eX cellent leverage and control. Stone mounted on a double saw handle for very large rotating equipment.

. Commstones should be twice as long as the width of the longest flat spot and as long as will work freely between adjacent brush sets.2 in X 2 in X 8 in, Grade Srm, Commstone When compared to turning tools commstones are easier to use, more time effective, and remove less copper.

Recommended in commutator maintenance for periodic cleanup of surface, or for polishing the commutator after grinding with a Diamond D Commstone.4 in X 3 in X 2 in, Rubber Bond Cleaning Stone With Railway Handle Vertically mounted railway handle for leverage Mildly abrasive, they do only enough cutting to produce a high polish and fine finish. They are slow-wearing, non-loading, and will not gum or dust.

Stone mounted on either a right angle or straight tramway handle.

200 Series Pressure Switch, Brass, SPDT,, 1/4" NPT, 3-15 psi, Weatherpack Shroud 200 Series Mechanical Compact Pressure Switch, Zinc-Nickel Plated Steel Wetted Materials, BUNA-N Diaphragm, 1 SPDT, NO / NC, 1/8 in. RoHS compliant..

Ranges from vacuum to 0 psig to 15,000 psig; absolute ranges from 0 psia to 15 psia through 0 psia to 300 psia.

Pressure Gauge, 4 in. 304SS Case, Copper Alloy Internals, 400 psi/bar, 1/4 NPT Male Back Conn, Glycerin Filled. High quality liquid filled gauge. Pressure Gauge, 2.

.25% Accuracy (BFSL), 0 Vdc to 10 Vdc Output, SAE J1926-3:7/16-20 Adjusta CE compliant to suppress RFI, EMI and ESD.5% Accuracy BFSL, 0 Vdc to 10 Vdc Output, SAE J1926-3:7/16-20 Adjustable, 4 Pin Bayonet.

5" 304SS Case, Copper Alloy Internals, 600 psi/kPa, 7/16-20 Male Back Conn, Glycerin Filled, Panel Mount Clamp Copper alloy and Brass wetted parts. Pressure Gauge, 2. Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges.For gauges with MIP, GY40 fill is standard for liquid filled gauges.