2 FNPT Stainless Steel Ball Valve Inline

General Purpose Slotted Screwdriver, Tip Size 1/8 in, Slotted, Ergonomic, Overall Length 9 in, ESD Safe No, Non-Sparking No, Non-Magnetic No, Insulated No, Corrosion Resistant No, No, Tip Finish None, Shank Coating Chrome.

Oily Waste Can, Can Diameter 9 5/8 in, Capacity 2 gal, Can Material Steel, Material Finish Powder Coated, Color Red, Height 9 1/8 in, Length 9 5/8 in, Lid Closure Type Hand Operated Self Closing, For Location Countertop, Product Type Oily Waste Can, Standards FM, OSHA, Width 9 1/8 in.

HOT SURFACE IGNITION MODULE,6 SECOND TRI.

Stretch Wrap Category Product Concealing Stretch Wrap, Stretch Wrap Style Cast, Stretch Wrap Application Standard Duty, Overall Width 5 in, Overall Length 1,000 ft, Gauge 80 ga, Stretch Wrap Handle Type Reusable Handle, Stretch Wrap Film Grade Handle Opaque Stretch Wrap, Mil Thickness 0.8 mil, Sheets Per Roll Continuous Roll, Package Quantity 4.

Concrete Anchor Screw, Anchor Diameter 1/4 in, Overall Length 3 3/4 in, Head Type Flat, Drive Type Torx, Material Steel, Finish Climaseal, Material Grade/Class 1022, Compatible Material Block, Brick, Concrete, Drill Bit Size 3/16 in, Screw Anchor Type Concrete Screw Anchor, System of Measurement Inch, Maximum Ultimate Shear Strength 1,440 lb, Maximum Ultimate Tension Strength 950 lb, Minimum Installation Depth 1 in, Manufacturer Location Made in USA, Body Length 3 3/4 in, Package Quantity 100.

Coated Gloves, ANSI/ISEA Cut Level A4, Glove Style Knit, Knit Material HPPE, ANSI/ISEA Abrasion Level 5, Hand Protection Style Glove, Additional Hazard Protection None, Standards ANSI/CE, Glove Coating Cover Palm, Glove Hand Style Left and Right, Double-Dipped No, Coating Type Dipped, Glove Performance General Purpose, 1 Pair.

Steam Pressure 250 psi WSP, Temp.2" FNPT Stainless Steel Ball Valve Inline Range -20 Degrees to 500 Degrees F, Ball Material 316 Stainless Steel, Seat Material PTFE, Stem Type Positive Retained, Handle Type Locking Lever, Handle Material 304 Stainless Steel, Stem Material 630 Stainless Steel, Body Seal Material Graphite Pressure 1,500 psi CWP, Max..

Wire Shelf, Color Silver, Chrome Finish, Material Steel, Mounting Hardware Required Yes, Mounting Location Bottom, Middle; Top, Number of Pieces 4, Number of Shelves 4, Overall Depth 14 in, Overall Width 24 in, Shelf Adjustment Type Split Sleeve, Shelf Depth 14 in, Shelf Width 24 in, Load Capacity 800 lb, Lip Type Stationary, Lip Height 1/4 in, Includes Mounting Hardware Yes, Includes (16) Pairs of Split Sleeves, Yes NSF Certified, Dry, ISO 9001-9002 Standards, Package Quantity 4.

. Steam Pressure 250 psi WSP, Temp.2" FNPT Stainless Steel Ball Valve Inline Range -20 Degrees to 500 Degrees F, Ball Material 316 Stainless Steel, Seat Material PTFE, Stem Type Positive Retained, Handle Type Locking Lever, Handle Material 304 Stainless Steel, Stem Material 630 Stainless Steel, Body Seal Material Graphite Pressure 1,500 psi CWP, Max.

Wire Shelf, Color Silver, Chrome Finish, Material Steel, Mounting Hardware Required Yes, Mounting Location Bottom, Middle; Top, Number of Pieces 4, Number of Shelves 4, Overall Depth 14 in, Overall Width 24 in, Shelf Adjustment Type Split Sleeve, Shelf Depth 14 in, Shelf Width 24 in, Load Capacity 800 lb, Lip Type Stationary, Lip Height 1/4 in, Includes Mounting Hardware Yes, Includes (16) Pairs of Split Sleeves, Yes NSF Certified, Dry, ISO 9001-9002 Standards, Package Quantity 4.