Grade A325, 1/2-13 Structural Bolt, Hot Dipped Galvanized Steel, 2 1/2 In L, 25 PK

Not Graded, 3/4"-10 Hex Head Cap Screw, Plain 18-8 Stainless Steel, 7 in L, 25 PK Thread Length 1 3/4 in, Head Height 15/32 in, Head Width 1 1/8 in, Package Quantity 25.

5 mm, Head Width 8 mm, Package Quantity 100.80 Hex Head Cap Screw, Zinc Plated Steel, 20 mm L, 100 PK Thread Length 20 mm, Head Height 3.Class 8.8, M5-0.

Grade A325, 3/4"-10 Structural Bolt, Plain Steel, 2 in L, 10 PK 1 1/4 in, Head Height 15/32 in, Tensile Strength (PSI) 105,000 psi, Rockwell Hardness HRC25, Package Quantity 10.

196 in, Minimum Material Thickness 7/16 in, Maximum Material Thickness 3/4 in, Material Grade/Class IFI-116-19, Mandrel Material Steel, Features Not Applicable, Color Gray.Blind Rivet, System of Measurement Inch, Overall Length 2 9/32 in, Body Length 15/16 in, Shank Diameter 0.188 in, Product Type Blind Rivet, Body Material Aluminum, Finish Plain, Head Type Flanged, Head Diameter 5/8 in, Head Angle 90 Degrees , Shear Strength 292 lb, Tensile Strength 471 lb, Maximum Hole Diameter 0.

086 in, Head Diameter 0.Socket Head Cap Screw, Head Type Standard, System of Measurement Inch, Drive Type Socket, Drive Size 5/64 in, Material Stainless Steel, Material Grade/Class 18-8, Finish Plain, Thread Size #2-56, Minimum Thread Length 5/8 in, Fastener Length 7/8 in, Head Height 0.14 in, Pack Size Small Pack, Thread Style Partially Threaded, Special Features Not Applicable, Countersink Angle Not Applicable, Dimensional Standards ASME B18.3, Flange Diameter Not Applicable.

5 mm, Head Width 30 mm, Package Quantity 5.50 Hex Head Cap Screw, Plain 18-8 Stainless Steel, 35 mm L, 5 PK Thread Length 35 mm, Head Height 12.Not Graded, M20-2.

Grade A325, 1/2"-13 Structural Bolt, Hot Dipped Galvanized Steel, 2 1/2 in L, 25 PK 7/8 in, Head Height 5/16 in, Tensile Strength (PSI) 105,000 psi, Rockwell Hardness HRC25, Package Quantity 25.

3, Pack Size Small, Type Standard Machine Screw, Maximum Head Width 0.6.Machine Screw, Head Type Flat, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size 1/4 In.153 in, Drive Size #3, Tensile Strength 60,000 psi, Dimensional Standards ASME B18.

Grade A325, 1/2"-13 Structural Bolt, Hot Dipped Galvanized Steel, 2 1/2 in L, 25 PK 7/8 in, Head Height 5/16 in, Tensile Strength (PSI) 105,000 psi, Rockwell Hardness HRC25, Package Quantity 25.

-20, Fastener Length 1 1/4 in, Head Width 0.3, Pack Size Small, Type Standard Machine Screw, Maximum Head Width 0.Machine Screw, Head Type Flat, Material Steel, Finish Zinc Plated, Drive Phillips, Thread Size 1/4 In.