Gray PVC Type 2 Rectangle Stock 2 Ft L

Shaft Collar, System of Measurement Metric, Bore Type Round, Bore Diameter 15 mm, Bore Thread Size Not Applicable, Collar Outside Diameter 34 mm, Inside Height to Flat Not Applicable, Clearance Diameter 39.3 mm, Collar Width 13 mm, Collar Material Plastic, Keyway Width Not Applicable, Collar Material Grade Acetal, Keyway Depth Not Applicable, Thread Direction Not Applicable, Center to Lever Top Not Applicable, Collar Construction 1-Piece, Screw Material Stainless Steel.

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1/2 in, Bore Thread Size Not Applicable, Collar Outside Diameter 1 1/8 in, Inside Height to Flat Not Applicable, Clearance Diameter 1.28 in, Collar Width 7/8 in, Collar Material Stainless Steel, Keyway Width Not Applicable, Collar Material Grade 303, Keyway Depth Not Applicable, Thread Direction Not Applicable, Center to Lever Top Not Applicable, Collar Construction 2-Piece, Screw Material Stainless Steel.

Drill/Tap/Countersink, Thread Size #10-24, UNC, High Speed Steel, Overall Length 2 1/32 in.

001 in, Material Steel, Material Grade/Class Ungraded, Finish Plain, Color Silver, Temper Full Hard, Material Quality Standards AISI 1008-1010, Pack Size Small Pack, Tensile Strength 80,000 psi, Manufacturer Location Made in USA*, System of Measurement Inch.015 in, Thickness Tolerance +/-0.

Hex Nut, 2", Alloy Steel 304.

22 Percent, Plastic Density 0.1 ft-lb/in, Friction Coefficient 0.051 lb/cu in, Corrosion and Chemical Resistance Fair.

0 ft-lb/in, Friction Coefficient 0.051 lb/cu in, Corrosion and Chemical Resistance Excellent.2 Percent, Plastic Density 0.25 in, Gray, Plastic Clarity Opaque, Tensile Strength 7,250 psi, Impact Strength 1.

Micrometer,Tube,0-15/.01mm.

2 Percent, Plastic Density 0.Rectangle Stock, PVC Type 2, Standard, Plastic Length 24 in, Plastic Width 3 in, Plastic Thickness 0.6, Water Absorption 0.0 ft-lb/in, Friction Coefficient 0.

Micrometer,Tube,0-15/.