reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Hardware Supplies,Hole Plugs
MIDWEST FASTENER

3/16 White Nylon Plastic Flush Head Hole Plugs 18 18PK

About The .Hole plugs are used to cover a hole to prevent debris from entering

Hole plugs are used to cover a hole to prevent debris from entering.

Hardware Supplies,Hole Plugs

3/16 White Nylon Plastic Flush Head Hole Plugs 18 18PK

Hardware Supplies,Hole Plugs

Specifications of 3/16 White Nylon Plastic Flush Head Hole Plugs 18 18PK

Category
Instockinstock

Last Updated

3/16 White Nylon Plastic Flush Head Hole Plugs 18 18PK
More Varieties

Rating :- 9.87 /10
Votes :- 29
3/32 x 1 Zinc Plated Steel Cotter Pins 100PK

3/32 x 1 Zinc Plated Steel Cotter Pins 100PK

A cotter pin is a split pin with two tines that are bent during installation used to fasten metal together, like with a staple or rivet..

  • Pins,Cotter Pins
  • MIDWEST FASTENER
    • A shoulder screw differs from machine screws in that the shank is ground to a precise diameter, known as the shoulder, and the threaded portion is smaller in diameter than the shoulder.

    A shoulder screw differs from machine screws in that the shank is ground to a precise diameter, known as the shoulder, and the threaded portion is smaller in diameter than the shoulder.

    It is usually used for revolving joints in mechanisms and linkages; when used as a guide for the stripper plate in a die set its called a stripper bolt..

  • Screws & Bolts,Shoulder Bolts
  • MIDWEST FASTENER
    • A carriage bolt has a domed or countersunk head, and the shank is topped by a short square section under the head.

    A carriage bolt has a domed or countersunk head, and the shank is topped by a short square section under the head.

    .1/4"-20 x 4" Coarse Thread Carriage Bolts 5PK The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened.

  • Screws & Bolts,Carriage Bolts
  • MIDWEST FASTENER
    • Instead of threads a push nut uses flanges facing inward acting as teeth to hold it in place.

    Instead of threads a push nut uses flanges facing inward acting as teeth to hold it in place.

    .4mm x 11mm Zinc Plated Steel Push Nut Washers 20PK It can be pushed or lightly tapped into place and requires cutting to remove.

  • Nuts,Push Nuts
  • MIDWEST FASTENER
    • Instead of threads a push nut uses flanges facing inward acting as teeth to hold it in place.

    Instead of threads a push nut uses flanges facing inward acting as teeth to hold it in place.

    4mm x 11mm Zinc Plated Steel Push Nut Washers 20PK It can be pushed or lightly tapped into place and requires cutting to remove..

  • Nuts,Push Nuts
  • MIDWEST FASTENER