reorder
tools-and-supplies.champsview.com
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Pressure & Vacuum Measuring,Gauge guards,Seals & Accessories
NOSHOK

Sintered Pressure Snubber, 1/4 NPT, 316SS, C Disc Installed, Pressure Rating 15,000 PSI

About The Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element..Cost effective solution to protect expensive instrumentation

Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element. Provides long service life with no moving parts to wear out. 5 basic elements available for each snubber to accommodate specific application needs. Exotic materials or intermediate disc grades available. Cost effective solution to protect expensive instrumentation. Increases gauge readability by smoothing out pressure surges, pulsations and spikes.

Pressure & Vacuum Measuring,Gauge guards,Seals & Accessories

Sintered Pressure Snubber, 1/4 NPT, 316SS, C Disc Installed, Pressure Rating 15,000 PSI

Pressure & Vacuum Measuring,Gauge guards,Seals & Accessories

Specifications of Sintered Pressure Snubber, 1/4 NPT, 316SS, C Disc Installed, Pressure Rating 15,000 PSI

Category
Instockinstock

Last Updated

Sintered Pressure Snubber, 1/4 NPT, 316SS, C Disc Installed, Pressure Rating 15,000 PSI
More Varieties

Rating :- 9.53 /10
Votes :- 28
Each piece of this décor has its own artistic nature that can be individually appreciated The cord pendant fixture is equipped with a 10' SVT cordset and an low profile flat monopoint canopy.

Each piece of this décor has its own artistic nature that can be individually appreciated The cord pendant fixture is equipped with a 10' SVT cordset and an low profile flat monopoint canopy.

When lit this glass features a dimensional effect from the whites lines that are interlaced at various levels. This décor is full of textured and creates a point of interest to any room. Coco 8 Pendant, Cocoon, Bronze Finish, 1x60W Incandescent The globe-shaped Coco is a blown glass with a neutral décor and classic shape that blends gracefully into all environments. This blown glass is handcrafted by a skilled artisan, utilizing century-old techniques passed down from generation to generation.

  • Decorative Lighting,Pendants
  • BESA LIGHTING
    • 3-1/2 ME2000 4-BOLT FLANGE NON-EXP

    3-1/2 ME2000 4-BOLT FLANGE NON-EXP

    ME2000 SPHERICAL E FLANGE.

  • Bearings,V-belts & Power Transmission Equipment,Pillow Block & Flange Bearings,Flange Bearings
  • MOLINE BEARING
    • Pushrod Long 24

    Pushrod Long 24

    TEMPO COMMUNICATIONS PR-24 Pushrod Long 24.

  • Hand Tools,Electrical Tools,Cable Pullers
  • TEMPO COMMUNICATIONS
    • Our Commstones come in 6 grits for commutator or brass/copper slip rings: EC EX tra Coarse-36 Grit, C Coarse-46 Grit, M Medium-90 Grit, F Fine-120 Grit, P Polishing-220 Grit, EP EX tra Polish-320 GritWe also have 3 grits for cast iron and steel slip rings: SRC Coarse-36S Grit, SRM Medium-60S Grit, SRF Finish-90S GritCommutator stones are used for grinding commutators and slip rings into concentricity for maintenance and repair.

    Our Commstones come in 6 grits for commutator or brass/copper slip rings: EC EX tra Coarse-36 Grit, C Coarse-46 Grit, M Medium-90 Grit, F Fine-120 Grit, P Polishing-220 Grit, EP EX tra Polish-320 GritWe also have 3 grits for cast iron and steel slip rings: SRC Coarse-36S Grit, SRM Medium-60S Grit, SRF Finish-90S GritCommutator stones are used for grinding commutators and slip rings into concentricity for maintenance and repair.

    .3/8 in X 3/8 in X 6 in, Grade Srm, Commstone, Pencil Type When compared to turning tools commstones are easier to use, more time effective, and remove less copper. Commstones should be twice as long as the width of the longest flat spot and as long as will work freely between adjacent brush sets.

  • Motors,Motor Supplies,Commutator Maintenance Products
  • MARTINDALE ELECTRIC CO
    • Combines isolating and venting in a single valve, eliminating the need for tubing and fittings.

    Combines isolating and venting in a single valve, eliminating the need for tubing and fittings.

    187" Orifice NPT vent plug is located 90Deg to the left and may be removed and replaced with exhaust piping to direct the fluids to a safe location.

  • Pipes,Valves & Fittings,Valves,Needle Valves
  • NOSHOK
    • Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges.

    Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges.

    5 in. Pressure Gauge, 4" 304SS Case, 316SS Internals, 300 psi/kg/cm2, 1/4 NPT Male Bottom Conn, Glycerin Filled, Adjustable Pointer Pressure Gauge, 2..

  • Pressure & Vacuum Measuring,Pressure Gauges
  • NOSHOK
    • Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element.

    Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element.

    Increases gauge readability by smoothing out pressure surges, pulsations and spikes.. 5 basic elements available for each snubber to accommodate specific application needs. Cost effective solution to protect expensive instrumentation.

  • Pressure & Vacuum Measuring,Gauge guards,Seals & Accessories
  • NOSHOK
    • Vacuum and compound ranges through 0 psi to 15,000 psi.

    Vacuum and compound ranges through 0 psi to 15,000 psi.

    . Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges.For gauges with MIP, GY40 fill is standard for liquid filled gauges.5" 316SS Internals, 400 psi, 1/4 NPT Male Bottom Conn 316 Stainless Steel or Brass wetted parts.

  • Pressure & Vacuum Measuring,Pressure Gauges
  • NOSHOK
    • Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element.

    Snubbing action achieved by utilizing a corrosion resistant 316 Stainless Steel sintered porous element.

    Cost effective solution to protect expensive instrumentation.. Sintered Pressure Snubber, 1/4 NPT, 316SS, "C" Disc Installed, Pressure Rating 15,000 PSI Provides long service life with no moving parts to wear out. 5 basic elements available for each snubber to accommodate specific application needs.

  • Pressure & Vacuum Measuring,Gauge guards,Seals & Accessories
  • NOSHOK
    • Vacuum and compound ranges through 0 psi to 15,000 psi.

    Vacuum and compound ranges through 0 psi to 15,000 psi.

    Cleaning for Oxygen Service O2 is available only for dry or HL Halocarbon filled gauges. 316SS Internals, 200 psi, 1/4 NPT Male Bottom Conn, Glycerin Filled, Safety Glass Lens. Process Gauge, 4.5 in.

  • Pressure & Vacuum Measuring,Pressure Gauges
  • NOSHOK