Hoist, 1100 Lb. Load Capacity, 5 Ft Hoist Lift

About The Hoist

Hoist

Lifting,Pulling & Positioning,Lifting Equipment,Hoists

Vacuum Generator,3 Stage

Nitrile Coated Gloves, Full Coverage, Blue, S, PR

Lifting,Pulling & Positioning,Lifting Equipment,Hoists

Specifications of Hoist, 1100 Lb. Load Capacity, 5 Ft Hoist Lift
Category
Instock	instock

Last Updated May 23rd, 2024 03:37 pm

Hoist, 1100 Lb. Load Capacity, 5 Ft Hoist Lift

More Varieties

Rating :- 8.01 /10

Votes :- 27

Mini Barb Fitting,27/32,Brass,Beaded

MINI BARB FITTING, Fitting Side A Connection Type MNPT, Fitting Side B Connection Type Barbed, Fitting Side A Pipe Size 1/8 in, Fitting Side B Tube Inner Diameter 1/8 in, Barb Style Beaded, Fitting Material Brass, Material Grade CA360, Finish/Coating Nickel-Plated, Overall Length 27/32 in, Specific Fitting Shape Straight Adapter, Application Air, Fuels, Non-Potable Water, Maximum Operating Pressure 120 psi @ 72 Degrees F, Maximum Operating Temperature 230 Degrees F.

Pipes,Valves & Fittings,Tube Fittings,Barbed Tube Fittings

MEM-CO

1 13/64 in, Hose Length 20 ft, Hose Tube Material PTFE, Hose Cover Material EPDM, Hose Reinforcement Type Helix, Hose Reinforcement Material Not Reinforced, Hose Color Blue, Burst Pressure 2,000 psi, Max.

Chemical Hose Assembly, Hose Inside Dia. Range -40 Degrees to 300 Degrees F, Standards 3A Sanitary, FDA, USDA Under 21 CFR 177, Bend Radius 3 1/2 in, Hose Configuration Coupled Assembly. Chemical Hose Assembly,3/4" ID x 20 ft. Working Pressure @ 70 F 250 psi, Safety Factor 4:1, Temp.

Pipes,Valves & Fittings,Supply Lines,Stainless Steel Hose Assembly

NOVAFLEX

Retractable Belt Barrier,Powder Coated

Warehouse Quick Mount Retractable Belt Barrier, Rack Mount, Finish Powder Coated, Belt Length 18 ft.) 3-1/4, Width (In.) 2, Mounting Style Quick Mount, Color Yellow.

Facility & Worksite Safety,Crowd Control,Crowd Control Post & Ropes

LAVI INDUSTRIES

Shaft Seal, 15 x 28 x 7 mm., SC, Nitrile Rubber

Rotary Shaft Seal, Design Code SC, Inside Diameter 15 mm, Outside Diameter 28 mm, Overall Width 7 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, System of Measurement Metric, Case Coating None.

Motors,Motor Supplies,Shaft Seals & Adapters

DDS

Shaft Seal, 40 x 55 x 8 mm., TCV, Fluoro Rubber

Rotary Shaft Seal, Design Code TCV, Inside Diameter 40 mm, Outside Diameter 55 mm, Overall Width 8 mm, Contact Type Contact Seal, Lip Material Fluoro Rubber, Maximum Pressure 10 psi, Number of Lips 2, System of Measurement Metric, Case Coating None, Maximum Surface Speed 999 mps, Seal Type Dual Lip Seal.

Motors,Motor Supplies,Shaft Seals & Adapters

DDS